Helmets

The ultimate commuter helmet cover combrines a fully reflective fabric, with water and wind protection. - Sugoi's fully reflective and waterproof Zap fabric is designed for high visibility in low light - Two sizes to offer a wider range of fit possibilities

Loosely based upon the leather "hairnets" that cyclists used to wear before protection was a priority, we took their ventilation and classic style and incorporated them into a modern helmet design that combines aerodynamics, weight, aesthetics, and ventilation—the Airnet with MIPS. - Ultra-light Mindset micro-dial fit system with height adjustability for the perfect fit. - 4th Dimension Cooling System with deep internal channels, large vents, and aligned exhaust ports. - Composite matrix internal reinforcement allows larger vents for enhanced cooling. - drirelease Merino wool pads for increased comfort and sweat/ temperature management. - Vent grippers integrated at the front and rear for secure eyewear storage. - Thin, soft, and lightweight 4X DryLite webbing won’t stretch out with sweat or water. - Tri-Fix web splitter for improved comfort and ease of strap adjustments. - Instrap webbing system for ultra-light construction and security. - Reflective decals for increased visibility in low-light conditions. - MIPS-equipped.

Clean aesthetic, comfortable fit, and a budget-friendly price—that's what makes up the Align II. The standout feature of the Align II is the inclusion of the Multi-Directional Impact Protection System (MIPS), a patented technology designed to mitigate against rotational forces transmitted to the brain during certain angled impact scenarios. In addition, the Align II became the only $50 helmet to earn the highest Five Star rating from the independent testing done at the renowned Virginia Polytechnic Institute and State University. When including MIPS and earning this Five Star Virginia Tech Helmet Rating we didn't give up any comfort—the Align II includes the Headset SX dial fit system for easy fit adjustment, our 4th Dimension Cooling System for incredible ventilation, and an easy one-size fit system. If you're on the quest for a feature-rich helmet that leaves some jingle jangle in your pocket, the Align II is for you. Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older. - Align II earned the highest 5-Star Virginia Tech Helmet Rating from internationally renowned Virginia Polytechnic Institute and State University. - The MIPS system is a low-friction layer that allows a sliding motion of 10 to 15mm in all directions. Studies indicate that this reduces some of the rotational forces transmitted to the brain during angled impacts. - Easily-adjustable, one-size Headset SX fit system is designed for easy and accurate fit for a wide range of head sizes. Add in a micro-adjustable dial for on-the-fly adjustability and you're ensured an easy, secure, and accurate fit. - 4th Dimension Cooling System optimizes ventilation. - In-molded shell improves strength and reduces weight. - Reflective decals for increased visibility in low-light conditions.

When ripping down the trail, the last thing you need to worry about is if your helmet will protect you in a crash. Then again, you don't want to be stuck wearing a full-face on every trail ride. This is why we created the Ambush Comp—a lightweight, extended coverage helmet at a wallet-friendly price. Starting with protection, the Ambush Comp boasts a significant amount of extended coverage and a single density foam that's been reinforced by a Composite Matrix. The reason behind this is that it manages the energy from impacts more effectively. Even with the added protection, though, it fits comfortably with our low profile and fully integrated Mindset 360 fit system. And with its five height positions, this system provides unmatched adjustment, while an integrated dial allows for on-the-fly fine-tuning. The Ambush Comp also keeps you cool with our 4th Dimension Cooling System's massive vents and exhaust ports, so you don't have to worry about overheating—even on the hottest days. Finally, we included a micro-indexing visor that quickly adjusts positions and has plenty of room for goggle storage. Combined, these features put the Ambush Comp well in front of the competition. Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older. - MIPS-equipped. - Composite Matrix internal reinforcement allows large vents for greater cooling. - In-molded shell improves strength and reduces weight. - Mindset 360 fit system provides a secure, comfortable fit with 360-degree tension adjustment, five height positions, and integrated dial for easy on-the-fly adjustments. - Micro indexing visor allows for a wide range of fast, secure on-trail adjustments, as well as convenient goggle stowage. - 4th Dimension Cooling system optimizes ventilation. - Extended coverage for added protection and durability. - Tri-Fix web splitter for improved comfort and ease of strap adjustments. - This helmet is ANGi ready, with a fit system mount designed for easy integration with our ANGi crash sensor. - Our available aftermarket ANGi sensor gives you and your loved ones peace of mind like never before. When combined with our Specialized Ride app, the ANGi sensor will evaluate the forces acting on the helmet in the event of an accident and, if necessary, send a text message to your specified contacts with your location.

Riding is for everyone, so we created the Camber to provide a dialed fit for rippers of all sizes, from kids on up. The Camber comes equipped with all the comfort, style, and ventilation to make every ride a joyride. Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older. - Camber earned the highest 5-Star Virginia Tech Helmet Rating from internationally renowned Virginia Polytechnic Institute and State University. - The MIPS system is a low-friction layer that allows a sliding motion of 10 to 15mm in all directions. Studies indicate that this reduces some of the rotational forces transmitted to the brain during angled impacts. - With x-small to x-large options spread across five unique shell sizes, the Camber eliminates excess bulk to deliver a comfortable and streamlined fit to a full range of riders. - Easily-adjustable, one-size Headset SX fit system with adjustable Tri-Fix web splitters delivers an easy and accurate fit. - 4th Dimension Cooling System optimizes ventilation. - In-molded shell improves strength and reduces weight. - This helmet is ANGi ready, with a fit system mount designed for easy integration with our ANGi crash sensor. - Average weight: 370 grams (medium).

Premium features, certified protection, and sleek styling make the Chamonix a tremendous value for any cyclist. You'll also find that it's equipped with next-level protection courtesy of revolutionary MIPS technology (Multi-Directional Impact Protection System). - One-size system, designed for an easy and accurate fit to a wide range of head sizes - Headset SX fit system with micro-adjustable dial for an easy, secure, and accurate fit - 4th Dimension Cooling System optimizes ventilation - In-molded shell improves strength and reduces weight - Tri-Fix web splitter for improved comfort and ease of strap adjustments - Reflective webbing and decals for increased visibility to motorists in low-light conditions - Patented clip-on visor included - MIPS-equipped - Fit system is ANGi crash sensor ready

Looking to take your second-generation Flux headlight off-road? You're going to need a helmet mount. - Breakaway design prevents snagging on overhead objects - Hook-and-loop strap can be reoriented 90 degrees to give additional mounting options - Fore/aft adjustability for optimal placement regardless of helmet vents - Action camera style hinge works with third-party mounts

Redefine Your Comfort Zone. To make a DH-certified full face with the ventilation and fit of a half shell, our development team took a fully integrated approach when creating the Gambit. Every component was engineered utilizing a comprehensive approach resulting in truly breakthrough performance where the Gambit delivers more than the sum of its parts. - Combines a lightweight carbon fiber shell, structurally specific polycarbonate backing, and five optimized pieces of targeted density foam (patent pending) for reduced weight, optimized fit, and increased ventilation. ASTM DH (1952) certified. - Tune a more precise, personalized fit thanks to Gambit's adjustable Integrated Fit System that accommodates variations in head shape and occipital base. - Occipital base adjustment personalizes fit for comfort and allows you to tune helmet angle to ensure that your helmet and eyewear stay perfectly synched. - 4-position adjustable cheek pads provide fit refinement for any head shape. - Integrated, fixed visor with a breakaway feature provides a wide field of view while protecting against trail debris. - Average weight: 640 grams (medium). - Increased airflow and improved ventilation from the SBC Integrated Fit System does away with the excessive padding of a traditional full-face friction fit. - MIPS SL with our exclusive perforated backing integrates MIPS technology within the helmet padding and reduces moisture retention while increasing breathability. - Computational Fluid Dynamic design integrates the maximum volume of internal channeling for optimal airflow through the helmet. 4D brow cooling provides a gap between the helmet and forehead, drawing airflow into internal air channels at every speed. - This helmet is ANGi ready, with a fit system mount designed for easy integration with our ANGi crash sensor.

Set your littlest riders on the path to two-wheeled freedom with the all-new Mio 2 helmet. Through an exclusive partnership with KTH Royal Institute of Technology (KTH) and Mips, we shared our helmet’s CAD designs and studied the malleable skulls of young children with Finite Element Analysis (FEA). Because toddler-aged children’s heads are softer and still growing, using low-density foam - and more of it - was the outcome of this partnership. DATA DRIVEN INNOVATION: Coming out of our KTH and Mips partnership, the Mio 2 had increased the amount of low-density foam inside by 16.5%, only growing the overall size of the helmet by 2.5%. COMFORT: The Mio 2 may have the latest and greatest technology inside, but that only matters when the helmet is worn properly. That’s why Mio 2 features specific toddler-oriented sizing and our SX headset fit system, to help it stay properly fitted and comfortable, whenever it is worn. The easy-to-use tri-fix web splitter makes getting a ‘fuss-free’ fit incredibly simple, all adding up to a helmet they’ll beg to wear. UNLEASH THEIR IMAGINATION: On the outside, the Mio 2 comes in energetic colors sure to inspire fun and creativity from adventure-hungry kids. The included sticker pack offers a retro vibe with a modern twist with bright graphics and lettering for even more personalization. After all, getting our young riders excited enough to want to wear their helmet every day is the number one goal. For helmets sold in the U.S. and Canada: Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 1 and Older. - Mips-equipped. - Headset SX fit system with toddler-oriented sizing that's designed for an easy and accurate fit. - In-molded shell improves strength and reduces weight. - Tri-Fix web splitter for improved comfort and ease of strap adjustments. - Reflective webbing and rear decal for increased visibility in low-light conditions. - 46-51 cm OSFM Toddler size, approximately up to age three. - Size: 18-20" / 46-51cm

The S-Works Prevail 3 helmet is perfect for riders who value the comfort and thermoregulation benefits that superior ventilation delivers. It is the ultimate all-around helmet that excels in hot conditions, strenuous climbs, and mountainous stages. With a never-ending quest to push the limits of ventilation, we eliminated air-blocking foam "bridges" from the center, effectively creating thru-air channels that increase the surface area of ventilation by 24.5% compared to the S-Works Prevail II Vent helmet. The all-new S-Works Prevail 3 has the most ventilation area of any helmet we have ever made. When a helmet is impacted, its job is to dissipate the energy of the impact. The conventional approach to helmet design is that more foam (EPS) means better energy management. We re-wrote the book on cycling helmet design by innovating beyond foam. Woven aramid "cables" traverse the helmet and are anchored to carbon fiber side panels. Upon impact, the AirCage technology* works as a suspension bridge and is designed to distribute localized forces throughout the helmet. The Occipital Base Adjustment optimizes comfort by personalizing fit to individual head shape and helmet angle can be adjusted for compatibility with glasses. An adjustable Tri-Fix web system gives riders added comfort with updated, thinner 10mm webbing that minimizes strap noise. And the ANGi-ready, ultralight Mindset micro-dial fit system with height adjustability has been updated for improved grip and reaction for easy on-the-go fit. Our ultralight and supremely comfortable MIPS Node Air technology is integrated directly into the helmet padding, with a sleek low friction layer designed to dissipate rotational forces. With Specialized's proprietary development work, we added perforations to maximize breathability, performance, comfort, and weight savings. - AirCage innovation increases airflow. - Precision, full-wrap polycarbonate shell for increased durability and premium finish. - MIPS Air Node technology is MIPS' most ventilation-focused solution. - Adjustable Tri-Fix web splitter boosts comfort through personalized fit. - Occipital Base Adjustment optimizes comfort and compatibility with glasses. - ANGi-ready Mindset fit system for improved grip and reaction for easy on-the-go fit.

Sleek styling, cool graphics, and youth-oriented sizing make the Shuffle Child LED helmet the perfect choice for your kids—day or night. - MIPS-equipped. - Integrated LED tail light for increased visibility in in both bright and low-light conditions. - Headset SX fit system with child-oriented sizing that's designed for an easy and accurate fit. - 4th Dimension Cooling System to optimize ventilation. - In-molded shell improves strength and reduces weight. - Tri-Fix web splitter for improved comfort and ease of strap adjustments. - Reflective webbing for increased visibility in low-light conditions. - Stylish, youthful designs complement our bike graphics and colors. - Patented clip-on visor included.

Sleek styling, cool graphics, and youth-oriented sizing make the Shuffle Youth LED helmet the perfect choice for your kids—day or night. You'll also find that it's equipped with next-level protection courtesy of revolutionary MIPS technology (Multi-Directional Impact Protection System). - MIPS-equipped. - Integrated LED tail light for increased visibility in in both bright and low-light conditions. - Headset SX fit system with youth oriented sizing that's designed for an easy and accurate fit. - 4th Dimension Cooling System to optimize ventilation. - In-molded shell improves strength and reduces weight. - Tri-Fix web splitter for improved comfort and ease of strap adjustments. - Reflective webbing for increased visibility in low-light conditions. - Stylish, youthful designs complement our bike graphics and colors. - Patented clip-on visor included.

Sleek styling, cool graphics, and youth-oriented sizing make the Shuffle Youth LED helmet the perfect choice for your kids—day or night. You'll also find that it's equipped with next-level protection courtesy of revolutionary MIPS technology (Multi-Directional Impact Protection System). Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older. - MIPS-equipped. - Integrated LED tail light for increased visibility in in both bright and low-light conditions. - Headset SX fit system with youth oriented sizing that's designed for an easy and accurate fit. - 4th Dimension Cooling System to optimize ventilation. - In-molded shell improves strength and reduces weight. - Tri-Fix web splitter for improved comfort and ease of strap adjustments. - Reflective webbing for increased visibility in low-light conditions. - Stylish, youthful designs complement our bike graphics and colors. - Patented clip-on visor included.

It's All in Your Tactic. With an unprecedented combination of fit, ventilation, and confidence for trail and enduro riding, the Tactic helmet delivers exceptional coverage and seamless integration with goggles or glasses. - Tune a more precise, personalized fit thanks to Tactic's slim, incredibly adjustable Integrated Fit System that accommodates variations in head shape and occipital base. - Occipital base adjustment personalizes fit for comfort and allows you to tune helmet angle to ensure that your helmet and eyewear stay perfectly synched. - Integrated fixed visor provides increased trail vision and a seamless interface with eyewear. Specifically designed eyewear channels always give you a spot to store your glasses at a moment's notice. - 380 grams (medium) of lightweight performance. - Computational Fluid Dynamic design integrates the maximum volume of internal channeling for optimal airflow through the helmet drawing heat away from the head. 4D brow cooling, which provides a gap between the helmet and forehead, draws airflow into internal air channels at every speed. - Whether you're riding acoustic or e-MTB, the Tactic passes the e-bike Standard NTA8776 so you can can send it with confidence on whatever bike choice you make. - The Tactic earned the highest 5-Star Virginia Tech Helmet Rating from the internationally renowned Virginia Polytechnic Institute and State University. - Fitted with a MIPS Evolve solution to provide 10 to 15 millimeters of rotation in every direction. - Integrated fit system allows for extended (occipital) coverage. - This helmet is ANGi ready, with a fit system mount designed for easy integration with our ANGi crash sensor.

When it's time to hit the road, the Agilis MIPS offers a sporty, sleek style with comfortable features you can count on, including 32 wind tunnel vents, Coolfit anti-microbial padding, and integrated MIPS technology. The fit on the Agilis MIPS is comfortable and secure thanks to our adjustable Roc Loc 5.5 MIPS system that combines fit and positioning adjustments while integrating with MIPS technology for an added measure of protection in the event of an angled impact. The outer Hardbody shell extends to the inside of the helmet, and is molded from a tough polycarbonate thats fused permanently to the EPS foam liner using our In-Mold process to enhance durability and ventilation without excess bulk. - 32 Wind tunnel vents with internal channeling - Full-wrap in-mold polycarbonate shell with EPS liner - Coolfit anti-microbial padding - Featherweight webbing with Slimline buckle - Roc Loc 5.5 MIPS fit system

When it's time to hit the road, the Women's Agilis MIPS offers a sporty, sleek style with comfortable features you can count on, including 32 wind tunnel vents, Coolfit anti-microbial padding, and integrated MIPS technology. The fit on the Women's Agilis MIPS is comfortable and secure thanks to our adjustable Roc Loc 5.5 MIPS system that combines fit and positioning adjustments while integrating with MIPS technology for an added measure of protection in the event of an angled impact. The outer Hardbody shell extends to the inside of the helmet, and is molded from a tough polycarbonate thats fused permanently to the EPS foam liner using our In-Mold process to enhance durability and ventilation without excess bulk. - 32 Wind tunnel vents with internal channeling - Full-wrap in-mold polycarbonate shell with EPS liner - Coolfit anti-microbial padding - Featherweight webbing with Slimline buckle - Roc Loc 5.5 MIPS fit system

Giro created the Bronte MIPS for riders in search of the renowned Giro fit and in need of an extra-large size. Inspired by the sleek style and cooling ventilation of the Register helmet, the Bronte MIPS is at home on pavement or the trail. In-Mold construction is used to make it light without compromising durability, and the acclaimed, adjustable Roc Loc Sport MIPS system makes it easy to custom-tune the fit for comfort and stability. An integrated Multi-Directional Impact Protection System, which can redirect energy and provide more protection in certain impacts, ensures that you get the latest in head protection technology.

The Dime is a kid-sized version of Giro's rugged Quarter adult helmet featuring a tough outer shell with impact-absorbing EPS liner, riveted webbing anchors and plush, sweat absorbent pads that are easy to swap for adjusting the fit. It also features a polyurethane coating to help protect the edges of the EPS liner. It's available in a bunch of great, kid-friendly colors too! - Small/Medium = 47-51cm - Medium/Large = 51-55cm

The Fixture MIPS brings confident mountain bike style and breezy ventilation together in a compact design that complements nearly any ride -- especially when there's dirt under tread. Some of Giro's best features, like In-Mold construction coupled with the ease and comfort of their acclaimed Roc Loc Sport fit system, offer the versatility you need to ride everything from fire-road adventures to swooping singletrack trails. The Roc Loc also is seamlessly integrated with the Multi-Directional Impact Protection System (MIPS), which can redirect energy and provide more protection in certain impacts.

DETAILS Premium Style for Recreational MTB How do you improve on the #1, top-selling helmet on Earth? Carefully, and with meticulous attention to detail. This updated helmet boasts a revised silhouette, redesigned integration of the Mips® Brain Protection System, and improved cooling power. Whether you're headed for off-road adventure or just a relaxing spin, the Fixture™ Mips II offers the right combination of value, performance, and classic design that can't be beat. With a strong and striking style, quick-dry padding, a simple and durable Roc Loc® Sport fit system, and reflective rear decals, every rider demand has been addressed. After all these updates and improvements, you'd be forgiven for thinking we doubled the price of this second-generation Fixture, but the Fixture Mips II retains its position as the value leader. FEATURES - INTEGRATED MIPS® BRAIN PROTECTION SYSTEM — All Giro helmets are designed to reduce as much energy as possible while meeting and exceeding stringent safety standards. The goal of Giro's Integrated Mips®-equipped helmets is to reduce rotational forces while enhancing fit and comfort by combining the Mips slip plane with the helmet's adjustable fit system. Giro believes that helmets equipped with this technology can reduce the amount of rotational force that may be transferred to rider's brain in certain impacts. Learn more about Mips in the video above. - IN-MOLD CONSTRUCTION — In-Mold Construction fuses a tough polycarbonate outer shell with the helmet's impact-absorbing foam liner. The fusion process allows for better ventilation systems, making in-mold helmets lighter and cooler than traditional helmets. - ROC LOC® SPORT FIT SYSTEM — The Roc Loc® Sport fit system offers easy one-handed operation with a 7cm adjustment range. Its confident clicking feel and sound lets riders know that the helmet is adjusting to a comfortable fit. With comfort similar Roc Loc 5 and ponytail compatibility, the new Roc Loc Sport fit system brings premium function to sport level helmets. - REFLECTIVE DETAILS — Reflective Details enhance visibility at nighttime or in low-light conditions when illuminated by a light source, such as headlights, by returning the light back to the source and reaching the driver's eye. - UNIVERSAL FIT™ SIZING — Our Universal Fit helmets are sculpted to look good and fit great for almost anyone on the first try. By developing proprietary shell sizes based on specific customer groups, and combining them with an easily-adjustable fit system, it's easy for you get the right fit, straight out of the box, without the hassle or expense of trying multiple sizes. HIGHLIGHTS - Quick-dry padding Complies with the US CPSC Safety Standard for Bicycle Helmet for Persons Age 5 and Older

How do you improve on the #1, top-selling helmet on Earth? Carefully, and with meticulous attention to detail. This updated helmet boasts a revised silhouette, redesigned integration of the Mips® Brain Protection System, and improved cooling power. Whether you're headed for off-road adventure or just a relaxing spin, the Fixture™ Mips II offers the right combination of value, performance, and classic design that can't be beat. With a strong and striking style, quick-dry padding, a simple and durable Roc Loc® Sport fit system, and reflective rear decals, every rider demand has been addressed. After all these updates and improvements, you'd be forgiven for thinking we doubled the price of this second-generation Fixture, but the Fixture Mips II retains its position as the value leader. FEATURES - INTEGRATED MIPS® BRAIN PROTECTION SYSTEM — All Giro helmets are designed to reduce as much energy as possible while meeting and exceeding stringent safety standards. The goal of Giro's Integrated Mips®-equipped helmets is to reduce rotational forces while enhancing fit and comfort by combining the Mips slip plane with the helmet's adjustable fit system. Giro believes that helmets equipped with this technology can reduce the amount of rotational force that may be transferred to rider's brain in certain impacts. Learn more about Mips in the video above. - IN-MOLD CONSTRUCTION — In-Mold Construction fuses a tough polycarbonate outer shell with the helmet's impact-absorbing foam liner. The fusion process allows for better ventilation systems, making in-mold helmets lighter and cooler than traditional helmets. - ROC LOC® SPORT FIT SYSTEM — The Roc Loc® Sport fit system offers easy one-handed operation with a 7cm adjustment range. Its confident clicking feel and sound lets riders know that the helmet is adjusting to a comfortable fit. With comfort similar Roc Loc 5 and ponytail compatibility, the new Roc Loc Sport fit system brings premium function to sport level helmets. - REFLECTIVE DETAILS — Reflective Details enhance visibility at nighttime or in low-light conditions when illuminated by a light source, such as headlights, by returning the light back to the source and reaching the driver's eye. - UNIVERSAL FIT™ SIZING — Our Universal Fit helmets are sculpted to look good and fit great for almost anyone on the first try. By developing proprietary shell sizes based on specific customer groups, and combining them with an easily-adjustable fit system, it's easy for you get the right fit, straight out of the box, without the hassle or expense of trying multiple sizes. HIGHLIGHTS - Quick-dry padding Complies with the US CPSC Safety Standard for Bicycle Helmet for Persons Age 5 and Older

Premium Style for Recreational MTB How do you improve on the #1, top-selling helmet on Earth? Carefully, and with meticulous attention to detail. This updated helmet boasts a revised silhouette, redesigned integration of the Mips® Brain Protection System, and improved cooling power. Whether you're headed for off-road adventure or just a relaxing spin, the Fixture™ Mips II offers the right combination of value, performance, and classic design that can't be beat. With a strong and striking style, quick-dry padding, a simple and durable Roc Loc® Sport fit system, and reflective rear decals, every rider demand has been addressed. After all these updates and improvements, you'd be forgiven for thinking we doubled the price of this second-generation Fixture, but the Fixture Mips II retains its position as the value leader. FEATURES - INTEGRATED MIPS® BRAIN PROTECTION SYSTEM — All Giro helmets are designed to reduce as much energy as possible while meeting and exceeding stringent safety standards. The goal of Giro's Integrated Mips®-equipped helmets is to reduce rotational forces while enhancing fit and comfort by combining the Mips slip plane with the helmet's adjustable fit system. Giro believes that helmets equipped with this technology can reduce the amount of rotational force that may be transferred to rider's brain in certain impacts. Learn more about Mips in the video above. - IN-MOLD CONSTRUCTION — In-Mold Construction fuses a tough polycarbonate outer shell with the helmet's impact-absorbing foam liner. The fusion process allows for better ventilation systems, making in-mold helmets lighter and cooler than traditional helmets. - ROC LOC® SPORT FIT SYSTEM — The Roc Loc® Sport fit system offers easy one-handed operation with a 7cm adjustment range. Its confident clicking feel and sound lets riders know that the helmet is adjusting to a comfortable fit. With comfort similar Roc Loc 5 and ponytail compatibility, the new Roc Loc Sport fit system brings premium function to sport level helmets. - REFLECTIVE DETAILS — Reflective Details enhance visibility at nighttime or in low-light conditions when illuminated by a light source, such as headlights, by returning the light back to the source and reaching the driver's eye. - UNIVERSAL FIT™ SIZING — Our Universal Fit helmets are sculpted to look good and fit great for almost anyone on the first try. By developing proprietary shell sizes based on specific customer groups, and combining them with an easily-adjustable fit system, it's easy for you get the right fit, straight out of the box, without the hassle or expense of trying multiple sizes. HIGHLIGHTS - Quick-dry padding Complies with the US CPSC Safety Standard for Bicycle Helmet for Persons Age 5 and Older

The Hale MIPS stays cool in any situation. It's made with Giro's simple and easy-to-adjust Roc Loc Sport MIPS fit system, which offers a large adjustment range to provide a secure fit for growing kids. It comes with a removable visor, too, and features the same In-Mold construction technology as Giro's best adult models, which bonds the shell to the helmet for a lightweight, durable design. And of course it comes in a range of fun, kid-friendly colors! The Hale MIPS also includes a seamless integrated Multi-Directional Impact Protection System, which can redirect energy and provide more protection in certain impacts.

Giro design, and high-performance innovation for core road cyclists, gravel enthusiasts, and adventure riders. Advanced Performance for the Adventurous The heart of the Helios's extraordinary design and performance is Spherical Technology, which utilizes a ball-and-socket design powered by MIPS, the market-leading brain protection system that can help to reduce rotational forces. Spherical Technology allows the helmet's outer liner to rotate around the inner liner during a crash, and also allows Progressive Layering of the inner and outer liners to provide more comprehensive protection and performance. In addition to advanced head protection, the Helios's 15 Wind Tunnel vents provide exceptional cooling power that's enhanced by our patented Roc Loc 5 Air fit system and plush, antimicrobial XT2 padding for exceptional sweat absorption. It's the ideal match for your road and gravel adventures. Specs: - Impact Management: Spherical Technology, Powered By Mips - Construction: Independent, in-mold liners with spherical ball-and-socket design, Polycarbonate Shell, Hardbody Lower Shell - Ventilation:15 wind tunnel vents with internal channeling - Fit System: Roc Loc 5 Air - Weight: 270 (Size Medium CPSC, CE) - Certification: Complies with the US CPSC Safety Standard for bicycle helmet for persons age 5 and older E.U.: CE EN1078 - Highlights: Nanobead EPS Foam, Coolfit Antimicrobial Padding, Slimline Webbing, Four-piece shell w/lower hardbody

The Merit Spherical is the ideal choice for fast, flowy trail riding and hard pedaling. With Spherical Technology, it offers more comprehensive performance and protection with the combination of a MIPS brain protection system to redirect rotational impact energy. Plus, separate inner and outer liners featuring Progressive Layering help manage high- and low-speed impacts. Massive Wind Tunnel vents are combined with channels in the EPS foam liner, creating amazing airflow through the helmet to exhaust heat out, even on long, hot climbs. Fit and stability adjustments are fast and easy with the Roc Loc Trail Air fit system, and plush Ionic+ padding provides exceptional sweat absorption while combating odor with permanent antimicrobial performance.

The Mountain/Urban Recreational Helmet Vent Light is one of the easiest and most powerful ways to increase visibility and safety on the road. Compatible with Fixture MIPS, Verce MIPS, Cormick MIPS, Trella MIPS, and Tremor™ MIPS.

The Quarter is one of the lowest-profile helmets we've ever made, and it's also the lightest we've made with an ABS shell. The essentials are here—an EPS liner for impact management, a tough outer shell, riveted webbing anchors, and plush, sweat absorbent pads that are easy to swap for dialing in the fit. Another standout feature—the polyurethane coating—helps to protect the EPS liner from daily wear and tear. Plus it's available in a bunch of great colors and three Super Fit sizes.

Giro's Quarter is the lowest profile helmet Giro has ever made, and it’s also the lightest they’ve made with an ABS shell. All of the essentials are here - a tough outer shell with impact- absorbing EPS liner, riveted webbing anchors and plush, sweat absorbent pads that are easy to swap for dialing in the fit. A polyurethane coating helps to protect the EPS liner from daily wear and tear. Available in a bunch of great colors and three Super Fit sizes. - Small = 51-55cm - Medium = 55-59cm - Large = 59-63cm

The Radix MIPS helmet combines rugged style and durability to meet the demands of core trail riders, with the coverage, lightweight, and ventilation riders need to ride comfortably and confidently, all day. The Radix MIPS helmet is for the rugged adventurer who appreciates a perfect fit, the sun staying out of their eyes, and plenty of ventilation. The highly adjustable Roc Loc 5.5 MIPS system allows you to customize fit and feel for enhanced stability and long-range comfort while providing an added measure of protection from rotational forces in the event of an angled impact. The P.O.V. Visor offers 15 degrees of adjustment, and the tough polycarbonate outer shell is fused permanently to the EPS foam liner using our in-mold construction process, to enhance durability and ventilation without excess bulk. - Construction: Full-wrap in-mold polycarbonate shell with EPS liner - Sport: Cycling - Number of vents: 25 - Ventilation type: Wind tunnel vents with internal channeling - Fit system: Roc Loc 5.5 MIPS

The Register MIPS helmet combines sleek design and lightweight construction to match your style, on the road or trail. Made in a comfortable Universal Fit size with Giro's convenient Roc Loc Sport fit system, the Register MIPS adjusts with a simple turn of the dial so you can tune the fit in seconds. A range of colors lets you choose exactly how your on-bike style comes together. Register MIPS models also have an integrated Multi-Directional Impact Protection System, which can redirect energy and provide more protection in certain impacts.

The Roc Loc 5 Led Light is one of the easiest and most powerful ways to increase visibility and safety on the road.

The Scamp is packed with amazing features, including some of the same elements found in Giro's best adult helmets, all in a smaller package designed to fit your child. The all new Roc Loc Jr. fit system with pinch-guard buckle provides an easy way to fit your kid’s helmet quickly and securely. With a wide size range, your child can use this helmet as they grow from balance bikes to training wheels. The design is inspired by the adults’ Montaro/ Montara, and since the Scamp is available in a range of kid-friendly colors and designs, your child will be excited to wear it every time they ride.

The Scamp is packed with amazing features, including some of the same elements found in Giro's best adult helmets, all in a smaller package designed to fit your child. The all new Roc Loc Jr. fit system with pinch-guard buckle provides an easy way to fit your kid’s helmet quickly and securely. With a wide size range, your child can use this helmet as they grow from balance bikes to training wheels. The design is inspired by the adults' Montaro/ Montara, and since the Scamp is available in a range of kid-friendly colors and designs, your child will be excited to wear it every time they ride.

Big Kid Style The Scamp II is Giro's smallest helmet designed for young (or future) riders but it still goes big with features and style. Taking design cues from adult helmets like Manifest Spherical, this lightweight in-mold helmet features impact-dissipating EPS foam with a sturdy polycarbonate shell, plus 13 vents for efficient cooling power. The Roc Loc® Junior fit system provides extra adjustability with a simple-to-use dial for several years of head protection for fast-growing rippers. The XS is designed for riders aged 1 and older while the Small is for riders aged 5 and older. Whether they're rolling along in a trailer or powering the pedals themselves, Scamp II is going to make kids want more bike time. FEATURES - IN-MOLD CONSTRUCTION — In-Mold Construction fuses a tough polycarbonate outer shell with the helmet's impact-absorbing foam liner. The fusion process allows for better ventilation systems, making in-mold helmets lighter and cooler than traditional helmets. - ROC LOC® JR. FIT SYSTEM — Roc Loc® Jr. is a simple, durable, dial fit system specifically shaped to match the curvature of a child's head. The shape was developed with years of research into anatomic data to ensure a secure, comfortable fit. A large, rubberized knob makes it easy for adults to adjust the helmet for proper tension, allowing kids to quickly start their ride. HIGHLIGHTS XS: Complies with the US CPSC Safety Standard for Bicycle Helmets for Persons Age 1 and Older (Extended Head Coverage) S: Complies with the US CPSC Safety Standard for Bicycle Helmet for Persons Age 5 and Older

The Scamp MIPS is packed with amazing features, including some of the same elements found in Giro's best adult helmets, all in a smaller package designed to fit your child. The Roc Loc Jr. fit system with pinch-guard buckle provides an easy way to fit your kid’s helmet quickly and securely. The wide size range ensures children can use this helmet as they grow from balance bikes to training wheels. The design is inspired by the adult Montaro MIPS / Montara MIPS, and since the Scamp MIPS is available in a range of kid-friendly colors and designs, children will be excited to wear it every time they ride. Scamp MIPS models are available with the Multi-Directional Impact Protection System. MIPS can redirect energy and provide more protection in certain impacts.

The Seyen MIPS combines a touch of European flair with slightly deeper coverage and high-performance features - all tucked into a very slim design. The outer shell is molded from a tough poly-carbonate that’s fused permanently to the EPS foam liner using Giro's In-Mold construction process to enhance durability and ventilation without excess bulk. The fit is luxurious and secure, thanks to the highly adjustable Roc Loc 5 Air MIPS system that allows you to customize fit/feel for great stability and long-range comfort. Another benefit is integrated MIPS which can provide an added measure of protection from rotational forces in the event of an angled impact.

The Seyen MIPS combines a touch of European flair with slightly deeper coverage and high-performance features—all tucked into a very slim design. The outer shell is molded from a tough polycarbonate that's fused permanently to the EPS foam liner using our In-Mold construction process to enhance durability and ventilation without excess bulk. The fit is luxurious and secure, thanks to our highly adjustable Roc Loc 5 Air MIPS system that allows you to customize fit/feel for great stability and long-range comfort. Another benefit is integrated MIPS which can provide an added measure of protection from rotational forces in the event of an angled impact. Vents: - 25 Wind Tunnel vents with internal channeling Construction: - In-Mold polycarbonate shell with EPS liner - Four-piece polycarbonate interlocking Hardbody shell Fit System: - Roc Loc 5 Air MIPS Other Tech And Features: - CoolFit anti-microbial padding - Full hardbody wrap - Featherweight webbing with Slimline buckle - Integrated MIPS technology

The Source MIPS helmet combines advanced performance and protection in a rugged, trail-ready design. Featuring deep coverage with aggressive ventilation from 16 vents coupled with deep internal channeling, it helps keep things cool even when the riding gets rowdy. And with the comfort and secure feel of the Roc Loc 5 fit system with Integrated MIPS brain protection, plus a moto-style adjustable screw-in visor and full lower Hardbody durability, you get a helmet that's capably equipped for fun and adventure. MIPS: - Integrated MIPS (Multi-Directional Impact Protection System)—allows you to customize fit/feel for great stability and long-range comfort while providing an added measure of protection from rotational forces in the event of an angled impact Construction: - In-Mold polycarbonate shell and EPS liner - Polycarbonate Hardbody lower shell Visor: - Adjustable moto-style screw-in visor Interior/liner type: - Coolfit anti-microbial padding Ventilation type: - 16 Wind Tunnel Vents with internal channeling Fit system: - Roc Loc 5 Impact liner type: - EPS foam liner Product weight: - 340g (size Medium)

The Source MIPS W helmet combines advanced performance and protection in a rugged, trail-ready design. Featuring deep coverage with aggressive ventilation from 16 vents coupled with deep internal channeling, it helps keep things cool even when the riding gets rowdy. And with the comfort and secure feel of the Roc Loc 5 fit system with Integrated MIPS brain protection, plus a moto-style adjustable screw-in visor and full lower Hardbody durability, you get a helmet that's capably equipped for fun and adventure. MIPS: - Integrated MIPS (Multi-Directional Impact Protection System)—allows you to customize fit/feel for great stability and long-range comfort while providing an added measure of protection from rotational forces in the event of an angled impact Construction: - In-Mold polycarbonate shell and EPS liner - Polycarbonate Hardbody lower shell Visor: - Adjustable moto-style screw-in visor Interior/liner type: - Coolfit anti-microbial padding Ventilation type: - 16 Wind Tunnel Vents with internal channeling Fit system: - Roc Loc 5 Impact liner type: - EPS foam liner Product weight: - 340g (Size Medium CPSC)

The Sport Recreational Helmet Vent Light is one of the easiest and most powerful ways to increase visibility and safety on the road.

Giro's Sutton is a low-profile design loaded up with clever features to help urban riders and commuters get more out of their ride. All of the essentials are here including a tough outer shell and a soft leather visor to shade your eyes. An integrated Light Clip at the back allows you to snap your light to the helmet for enhanced visibility, and a reinforced vent becomes a durable Lock Port so you can lock your helmet to the bike for convenience. - Small = 51-55cm - Medium = 55-59cm - Large = 59-63cm

The Syntax MIPS combines a touch of European flair with slightly deeper coverage and high-performance features—all tucked into a very slim design. The outer shell is molded from a tough polycarbonate that’s fused permanently to the EPS foam liner using Giro's In-Mold construction process to enhance durability and ventilation without excess bulk. The fit is luxurious and secure, thanks to the highly adjustable Roc Loc 5 Air MIPS system that allows you to customize fit/feel for great stability and long-range comfort. Another benefit is integrated MIPS which can provide an added measure of protection from rotational forces in the event of an angled impact. MIPS - Integrated MIPS (multi-directional impact protection system)—allows you to customize fit/feel for great stability and long-range comfort while providing an added measure of protection from rotational forces in the event of an angled impact CONSTRUCTION - In-mold construction - Four-piece polycarbonate interlocking hardbody shell - Full hardbody wrap SHELL TYPE - Polycarbonate shell SPORT - Cycling NUMBER OF VENTS - 25 INTERIOR/LINER TYPE - Coolfit anti-microbial padding VENTILATION TYPE - Wind tunnel vents with internal channeling GENDER - Unisex FIT SYSTEM - Roc Loc 5 Air IMPS MIPS IMPACT LINER TYPE - EPS CERTIFICATION - US CPSC bicycle for ages 5+ - EU: CE EN 1078

The Synthe is the pinnacle of road helmet design, combining the performance gains of aero efficiency and light weight with great cooling power to enhance rider comfort and efficiency. The compact form slips through the air with ease across multiple yaw and head angles, and offers greater cooling power than the Aeon. Key features include the Roc Loc Air fit system with 2-way fit tuning and Aero Mesh Panels with a dedicated port for securely docking sunglasses as you ride. Synthe MIPS models are equipped with the Multi-Directional Impact Protection System. MIPS can provide more protection in certain impacts, and this added “under the hood” technology does not compromise fit, ventilation or style.

When every curb is a jump and every patch of dirt screams for a skid, the Tremor MIPS is there to keep smiles wide. Featuring some of the best technologies from Giro's adult line, like In-Mold construction for reduced weight and enhanced durability, and their acclaimed Roc Loc Sport system for fast, secure fit adjustments, the Tremor is ready for any ride. Tremor MIPS models also include an integrated Multi-Directional Impact Protection System (MIPS), which can redirect energy and provide more protection in certain impacts, providing the latest in head protection technology for junior riders.

The Tremor MIPS helmet's cool style is more than meets the eye. It features the latest in head protection technology, an easy-to-adjust fit system, and 18 vents for breathability, making it a big hit with parents and little shredders alike. Featuring some of the best technologies from our adult line, like In-Mold construction for reduced weight and enhanced durability, and our acclaimed Roc Loc Sport system for fast, secure fit adjustments, ensure that the Tremor is ready for any ride. The Tremor MIPS also includes an integrated Multi-Directional Impact Protection System (MIPS), which can redirect energy and provide more protection in certain impacts, providing the latest in head protection technology for junior riders. MIPS: - Integrated MIPS (Multi-Directional Impact Protection System)—allows you to customize fit/feel for great stability and long-range comfort while providing an added measure of protection from rotational forces in the event of an angled impact Construction: - In-Mold construction - Full Hardbody shell Shell Type: - Polycarbonate shell - Number of vents: 18 Sport: - Cycling Visor: - Removable visor Interior/Liner Type: - Quick-dry padding Fit system: - Roc Loc Sport MIPS Impact Liner Type: - EPS

The Vasona MIPS helmet combines sleek, lightweight design with an integrated Multi-Directional Impact Protection System (MIPS) that can redirect energy and provide more protection in certain impacts, giving you the latest in head protection on the road or trail. Made in a comfortable, Universal Fit women's size with Giro's adjustable Roc Loc Sport fit system, the Vasona's fit can be custom-tuned with a simple turn of the dial to make fitting fast and hassle-free. And with a range of colors to suit almost any style, you can choose exactly how your on-bike style comes together.

The Agilis W MIPS offers assured style and performance for women, with a sleek silhouette, airy design, and MIPS technology. The Agilis MIPS W is the right choice for women looking for a helmet that combines airy design with slightly deeper coverage and a host of performance features aimed at road and multi-surface riding. The fit is comfortable and secure thanks to our adjustable Roc Loc 5.5 MIPS system that combines fit and positioning adjustments while integrating with MIPS technology for an added measure of protection in the event of an angled impact. The outer Hardbody shell extends to the inside of the helmet, and is molded from a tough polycarbonate that's fused permanently to the EPS foam liner using our In-Mold process to enhance durability and ventilation without excess bulk. The fit is comfortable and secure thanks to our adjustable Roc Loc 5.5 MIPS system that combines fit and positioning adjustments while integrating with MIPS technology for an added measure of protection in the event of an angled impact. The outer Hardbody shell extends to the inside of the helmet, and is molded from a tough polycarbonate that's fused permanently to the EPS foam liner using our In-Mold process to enhance durability and ventilation without excess bulk. Specs: - Impact Management: Integrated MIPS - Construction: In-mold construction, Four-piece Polycarbonate Interlocking Hardbody Shell, Full Hardbody Wrap - Ventilation:Wind tunnel vents with internal channeling - Fit System: Roc Loc 5.5 MIPS - Weight: 300g (Size Medium CPSC); 280g (Size Medium CE) - Certification: Complies with the US CPSC Safety Standard for bicycle helmet for persons age 5 and older E.U.: CE EN1078

Premium Style for Recreational MTB How do you improve on the #1, top-selling helmet on Earth? Carefully, and with meticulous attention to detail. This updated helmet boasts a revised silhouette, redesigned integration of the Mips® Brain Protection System, and improved cooling power. Whether you're headed for off-road adventure or just a relaxing spin, the Fixture™ Mips II offers the right combination of value, performance, and classic design that can't be beat. With a strong and striking style, quick-dry padding, a simple and durable Roc Loc® Sport fit system, and reflective rear decals, every rider demand has been addressed. After all these updates and improvements, you'd be forgiven for thinking we doubled the price of this second-generation Fixture, but the Fixture Mips II retains its position as the value leader. - INTEGRATED MIPS® BRAIN PROTECTION SYSTEM — All Giro helmets are designed to reduce as much energy as possible while meeting and exceeding stringent safety standards. The goal of Giro's Integrated Mips®-equipped helmets is to reduce rotational forces while enhancing fit and comfort by combining the Mips slip plane with the helmet's adjustable fit system. Giro believes that helmets equipped with this technology can reduce the amount of rotational force that may be transferred to rider's brain in certain impacts. Learn more about Mips in the video above. - IN-MOLD CONSTRUCTION — In-Mold Construction fuses a tough polycarbonate outer shell with the helmet's impact-absorbing foam liner. The fusion process allows for better ventilation systems, making in-mold helmets lighter and cooler than traditional helmets. - ROC LOC® SPORT FIT SYSTEM — The Roc Loc® Sport fit system offers easy one-handed operation with a 7cm adjustment range. Its confident clicking feel and sound lets riders know that the helmet is adjusting to a comfortable fit. With comfort similar Roc Loc 5 and ponytail compatibility, the new Roc Loc Sport fit system brings premium function to sport level helmets. - REFLECTIVE DETAILS — Reflective Details enhance visibility at nighttime or in low-light conditions when illuminated by a light source, such as headlights, by returning the light back to the source and reaching the driver's eye. - UNIVERSAL FIT™ SIZING — Our Universal Fit helmets are sculpted to look good and fit great for almost anyone on the first try. By developing proprietary shell sizes based on specific customer groups, and combining them with an easily-adjustable fit system, it's easy for you get the right fit, straight out of the box, without the hassle or expense of trying multiple sizes. - Quick-dry padding Complies with the US CPSC Safety Standard for Bicycle Helmet for Persons Age 5 and Older

If relentless performance and style is what you're after, then you'll get it with the Seyen MIPS. Its slim design, luxurious fit, and highly-adjustable fit system will let you focus on what you do best, the ride. The Seyen MIPS combines a touch of European flair with slightly deeper coverage and high-performance features—all tucked into a very slim design. The outer shell is molded from a tough polycarbonate that's fused permanently to the EPS foam liner using our In-Mold construction process to enhance durability and ventilation without excess bulk. The fit is luxurious and secure, thanks to our highly-adjustable Roc Loc 5 Air MIPS system that allows you to customize fit/feel for great stability and long-range comfort. Another benefit is integrated MIPS which can provide an added measure of protection from rotational forces in the event of an angled impact.

Comfortable and airy — you'll love Cannondale's Teramo helmet. Featuring a durable, one-piece polycarbonate outer shell with aluminum reinforcements, this lightweight lid also sports 23 massive vents for exceptional airflow. It even boasts dual-density EPS foam for protection without bulk. The retention system offers EVA foam padding and soft-touch straps with cam-lock dividers that let you dial in the perfect fit. - Small/Medium = 52-58cm - Large/X-Large = 58-62cm

With more all-around coverage and MIPS protection, the Sidetrack II is suited for the adventurous grom in your life. This all-mountain helmet offers a removable visor, an easy adjustable fit system, our sweat guide padding, and ready-for-action style that will get your child motivated to hit the trail! - 14 vents - Integrated MIPS (Multi-directional Impact Protection System) - MIPS is designed to reduce rotational forces that can result from certain impacts. By integrating the MIPS slip plane into the fit system, we are able to reduce complexity and weight for a compact, better ventilated helmet that fits more closely to the head. - Construction: Fusion in-mold polycarbonate shell - a process pioneered by Bell bonds the helmet's outer shell to the EPS foam liner to create a sturdier helmet. - Fit System: Ergo fit - sleek, easy-to-use dial system for one-handed adjustments (integrated with MIPS layer) - Retention System: No-twist tri-glides: quick-adjust fasteners that help keep straps flat and properly positioned - Interior: Sweat guide pad design pulls moisture away from the brow pad and away from eyewear

The FeatherWeight features In-Mold technology to make a custom shape and fit utilizing a thin outer shell that covers and protects high-density EPS foam. - High density EPS in-mold construction - Tested and certified for CPSC and EN 1078 standards for bicycle use - Two sets of padding included for custom fitting - Crow rivets and 10 flow-vents to keep cool - Small/Medium = 50 – 56cm - Large/X-Large = 58 – 61cm

The Shadow Classic Helmet is constructed with a high-impact ABS hard shell with a light EPS core liner for even distribution of force upon impact. - ABS Hardshell construction with light EPS core liner - Includes two sets of padding for a custom fit - CE and CPSE certified - Shadow Crow Head rivets and Classic woven label - X-Small = 46 – 50cm - Small/Medium = 50 – 56cm - Large/X-Large = 56 – 61cm - XX-Large = 61 – 65cm

Our patented ANGi sensor calls for help when you can’t. In fact, it’s the first device to protect you before, during, and after a crash. It does this through a pairing with our Specialized Ride App for iOS or Android devices. And if it detects a crash, it commences a countdown that, if you’re ok, you can stop and keep riding. If, however, ANGi determines that you’re in need of help, it’ll send an alert to your selected contacts with your last known GPS coordinates and a message that you’re in need of help. What about if you’re out of service coverage? ANGi has a plan for that. Just set your estimated ride time before you head out when you know that your ride will take you out of range. All you need is an active data signal when you start your session. And if you haven’t completed your ride within that time frame, ANGi will send a notification to your contacts with your last uploaded location. - ANGi is a ride tracker, crash detector, and safety beacon. - Includes a one-year subscription to Specialized Ride Premium app. - Detects and reports potentially dangerous helmet impacts to the Specialized Ride app, which notifies your emergency contacts and sends them your most recent GPS coordinates. - Additional premium features include start ride notifications and ride-time alerts. - Attaches to Specialized ANGi-ready helmets. - Approximate six months' battery life on a 2032 coin cell battery. - Weight: 10 grams w/ battery - Two-year sensor warranty

One helmet all road. The MET Allroad Mips is made for those who enjoy spending time on the saddle, whether on the tarmac or on gravel routes. Sporty on one side, comfy on the other. It's exceptionally lightweight and secure thanks to MET's distinguishing design. Perfect for your next bikepacking adventure. Featuring the MIPS-C2 brain protection system, the MET Allroad Mips is able to slide relative to the head in the case of a crash, redirecting damaging rotational motion. - In-mold polycarbonate shell with EPS liner - MIPS-C2 Brain Protection System - Snap in/out visor - Safe-T E-DUO Fit System - Vertical adjustment and ponytail-compatible - Integrated rear LED light - Reflective rear stickers - Internal air-channeling - Hand washable comfort pads - Adjustable cam divider - Certifications: CE; AS/NZS

The MET Downtown MIPS is a truly modern touring helmet, ready for a weekend trek or the daily bicycle lane. The internal air-channeling and large number of vents provide exceptional ventilation. The 360° head belt and lightweight design ensures that there will be no pressure points on the skull. Featuring the MIPS-C2 rotational management system, the Downtown is able to slide against the head in the case of a crash, redirecting damaging rotational motion. MIPS is engineered to add extra safety to the standard construction of helmets in case of certain impacts. The MIPS Brain Protection System (BPS) is attached inside the helmet, between the comfort padding and the EPS. - In-mold polycarbonate shell with EPS liner - MIPS-C2 Brain Protection System offers extra protection in the case of certain impacts - Safe-T Twist 2 Fit System - 360° head belt and vertical adjustments offer a customized fit - Straps with an adjustable divider provide a customized fit - Reflective rear decal to enhance visibility - 17 vents are internally engineered for air channeling to improve ventilation and comfort - Comfort pads are hand-washable - CE; AS/NZS; US Sizing: - Small/Medium = 52 – 58cm - Medium/Large = 58 – 61cm

The MET Echo MIPS is an entry-level MTB helmet high in quality and protection. It’s a perfect choice for those who are just beginning their adventures on the trails. The construction of the helmet offers the same technology and safety, with increased coverage around the back of the head. Featuring the MIPS-C2 brain protection system, the Echo is able to slide against the head in the case of a crash, redirecting damaging rotational motion. - In-mold polycarbonate shell with EPS liner - Fully polycarbonate wrapped EPS liner enhances durability - Extended head coverage for more thorough head protection - MIPS-C2 Brain Protection System offers extra protection in the case of certain impacts - MET Safe-T Mid Fit System - The 360° head belt reduces pressure points on the perimeter of the head - The removable visor with hidden anchors ensures maximum versatility - Hand washable comfort pads - Straps with an adjustable divider provide a customized fit - 14 vents are internally engineered for air channeling to improve ventilation and comfort - Reflective rear sticker - Certifications CE; AS/NZS Sizing: - Small/Medium = 52 – 57cm - Medium/Large = 57 – 60cm - Large/X-Large = 60 – 64cm

The MET Eldar MIPS has been re-designed for young riders who are fearless and skilled. A high quality helmet for those who aspire to ride the Enduro World Series one day. With extended coverage of the head it offers ultimate protection for those who dare to do more. Featuring the MIPS-C2 brain protection system, the Eldar is able to slide against the head in the case of a crash, redirecting damaging rotational motion. - In-mold polycarbonate shell with EPS liner - Extended head coverage for more thorough protection - MIPS C2 rotational management system is engineered to add protection in case of certain impacts - Exceptionally comfortable and secure on the head thanks to its refined internal shape - 14 vents are internally engineered for air channeling to improve ventilation and comfort - MET Safe-T Twist 2 Fit System - 360° head belt reduces pressure points on the head - Straps with adjustable dividers offer a customized fit - Reflective rear decal to enhance visibility - Comfort pads are hand-washable - Weight: 305g Sizing: - One Size = 52 – 57cm

The MET Estro MIPS is a versatile road helmet ready for your longest day on the bike. As comfortable as a top-of-the-line helmet, its design is widely open to maximize ventilation at low speeds. With 26 vents, 17 of which are inlets and 9 are exhaust holes, all of them work in synergy with the internally engineered air channeling system to ensure maximum ventilation. The Estro MIPS is also exceptionally comfortable. The 360° head belt in the MET Safe-T Upsilon retention system ensures that there will be no pressure points on the skull, and its internal shape is welcoming for almost all different shaped heads. Featuring the MIPS-C2 brain protection system, the MET Estro MIPS is able to slide against the head in the event of a crash, redirecting damaging rotational motion. MIPS is a brain protection system—engineered to add protection to the standard construction of helmets in case of certain impacts. The MIPS Brain Protection System (BPS) is attached inside the helmet, between the comfort padding and the EPS. The front of the helmet features two dedicated ports for securely docking sunglasses while resting or climbing. The design reflects the purpose - to adapt to various uses and environments. Widely open, deeper coverage, a versatile visor, and a full polycarbonate wrap that makes it more durable by avoiding exposure of EPS surfaces to outdoor conditions. - In-mold polycarbonate shell with EPS liner - Full polycarbonate wrapped EPS liner to enhance durability - Extended head coverage for more thorough skull protection - MIPS-C2 Brain Protection System add protection in case of certain impacts - MET Safe-T Upsilon Fit System - 360° head belt and vertical adjustments offer a customized fit - Air Lite straps with adjustable divider maximize aerodynamics and comfort - Sunglass ports to securely dock sunglasses - 26 vents are internally engineered for air channeling to improve ventilation and comfort - Comfort pads are hand-washable - Certifications CE; AS/NZS; US

The MET Hooray MIPS Helmet is safe, comfortable and has plenty of toddler-specific features that will protect the next generation of cyclists. The shell of the MET Hooray MIPS has a purposely flattened part at the back in order to be comfortable in any child seat. It also covers a large part of the two most sensible brain areas; the back and the temples. The internal shape features an engineered air channeling system to facilitate airflow, while MET's unique Bimbi Secure Technology ensures that there's no pressure points on the fontanel. Thanks to the new MET Safe-T Bimbo, the helmet will grow with the child's head. The retention system is easily adjustable due to the grippy nub, and the 360° head belt ensures a stable and secure fit. The ratchet buckle makes it easy to secure the helmet and avoid unexpected pinches on the skin. - In-mold polycarbonate shell with EPS liner - Extended head coverage and integrated visor for all-round head protection - MIPS-C2 rotational management system to increase protection against certain impacts - Fontanel protection thanks to MET Bimbi Secure Technology - Anti-pinch ratchet buckle makes it easier to secure the helmet - Internal engineered air channeling system features 10 vents to improve ventilation and comfort - MET Rear LED Light, 4 Spotlights, 60h Life - Reflective rear decal to enhance visibility - Design compatible with child-seat - MET Safe-T Bimbo Fit System with 360° head belt to follow the growth of the child - Straps with adjustable dividers ensure a custom fit - Anti-insect net embedded into the front vents - Hand washable comfort pads - Intended Age: 6-8 Years of Age Sizing: - X-Small = 46 – 52cm - Small = 52 – 55cm