Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Hubs

Odyssey Clutch Hub Guard
$9.99
- Press fit designed to work the hub's non-drive side collar.
Hope Fatsno 15x142mm Front Conversion Kit
$29.21
15x142mm conversion kit for Hope Fatsno front hubs.
SRAM 506 Front Hub
$30.00
SRAM's 506 hub borrows technology from its more expensive brethren to bring you a solid hub at a great price. An aluminum hubshell with hi/lo flanges provide no-nonsense durability and even spoke tension. Dependable cup and cone bearings with polished races roll smooth for the long haul and a strong, steel quick-release axle holds up under pressure.
Shimano Deore 6-Bolt Disc Brake Front Hub
$31.99
The Shimano HB-M525A hub is ideal for use with 6-bolt disc brake rotors and quick release dropouts. - Double contact sealing - Super polished bearing races for low friction rolling - 6-bolt ISO disc mounting surface
Hope Pro 2 & Pro 2 Evo 20mm Through Axle Front Hub End Caps
$32.29
Hope Front Axle Conversion Kits · Compatible with Pro 2 and Pro 2 Evo hubs · Converts all Hope Pro 2 and Pro 2 Evo front hubs to 20mm through axle hubs
Hope Pro 2 & Pro 2 Evo QR Front Hub Conversion Kit
$32.29
Hope Front Axle Conversion Kits · Compatible with Pro 2 and Pro 2 Evo hubs
Shimano 105 HB-R7000 Rim Brake Front Hub
$32.99
Internal O-rings, a grease sleeve, and high-quality cup and cone bearings lend this 105-level hub high durability and smooth rolling. - Internal O-rings and grease sleeve - High quality, sealed Cup & Cone Bearing - High durability and smooth rolling for sustained performance
Shimano HB-RS470 Front Hub
$33.99
The Shimano HB-RS470 front disc brake hub features a Center Lock design, Internal Grease Sleeve, and Cup and Cone Bearing technology. - The Center Lock system makes for easy rotor installation with a quick and secure spline mount and lock ring - Hub features internal o-rings and a grease sleeve that helps maintain grease levels and increases service life
Shimano SLX M7100 Front Hub
$45.99
With simple setup and reliable trail performance, the SLX front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with Center Lock spline mount and lock ring - Tool-free 15mm thru axle system is stiff and lightweight - Simple setup and reliable trail performance
Shimano Deore XT M756 6-Bolt Disc Front Hub
$53.99
Shimano XT M756 front hub. - Double contact sealing - Super polished bearing races for low friction rolling - Light alloy QR lever and nut - 6-bolt ISO disc mounting surface
Shimano Deore XT M8000 Rear Hub
$56.99
Shimano XT FH-M8010/M8000 Rear Hubs. - Double contact bearing seals - Super polished bearing races for low friction rolling - Shimano Quick-engagement freehub - Not compatible with Shimano 11-Speed Road cassettes - Cone bearings races ground by a Cubic Boron Nitride tool for smooth-rolling durability - Center Lock disc brakes provide reliable braking power (lockring sold separately)
Shimano Deore XT M8100 Front Hub
$57.99
With simple setup and reliable trail performance, the Shimano Deore XT 8100 front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with Center Lock spline mount and lock ring - Tool-less 15mm thru axle system optimizes rigidity and weight - Simple setup and reliable trail performance
Shimano ZEE Rear Freehub
$60.99
Shimano's ZEE Rear Freehub is a quick engaging, smooth-running hub that doesn't drain the bank account. It features quality sealing, adjustable angular-contact bearings, and rotates on an extra-stiff one-piece rear axle with integrated cone construction. It's Center Lock compatible and is available in 135, 142 and 150mm configurations.
DT Swiss Ratchet Freehub Body
$61.30 - $99.60
Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs.
Shimano Deore XT M756A 10-Speed 6-Bolt Disc Rear Hub
$68.99
Shimano XT FH-M756 Series Rear Hub - Double contact bearing seals - Super polished bearing races for low friction rolling - Light alloy QR lever and nut - 6-Bolt rotor mount - Bearing Type: Loose Ball - Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed - Center to Flange, Left: 33.5 - Center to Flange, Right: 20.5 - Flange Diameter Left: 61 - Flange Diameter Right: 61 - Hub Drilling: 32 - Hub/Brake Compatibility: 6-Bolt Disc - Rear Axle: QR x 135mm - Skewer Included: Yes - Spoke Interface: J-Bend - Weight: 495 grams
Odyssey Vandero Pro Front Hub
$69.99
The Vandero hub is back and better than ever. This new PRO version of the Vandero is a precision sealed hub with proven in-bound 3/8-inch axle bolts and two plastic guards. Features: - 7075-T6 aluminum hub shell - 6903RS sealed cartridge ball bearings - Precision bored fully concentric bearing seats for a smoother spin and prolonged bearing life - 17mm 7075-T6 aluminum axle with steel helicoil thread inserts - 3/8-inch heat-treated chromoly axle bolts with 17mm wrench flats and a 6mm hex slot - Weight: 11.2oz - Replaceable plastic hub guards included
DT Swiss 350 Front Hub
$76.90
The new standard for durability and price. - Contact-free seals and high precision build guarantee smooth bearings
DT Swiss 350 Road Front Hub
$76.90
Direct power meets simplicity—running smoothly day-in and day-out. The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.
DT Swiss 350 Straight Pull Road Front Hub
$76.90
Direct power meets simplicity—running smoothly day-in and day-out. The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.
DT Swiss 350s Straightpull Road Front Hub
$76.90
The value-packed DT Swiss 350s Straightpull road hub hits the sweet spot between light weight and reliability. The straight pull spoke design makes for a stiff, responsive wheel that will roll for thousands of nearly frictionless miles.
DT Swiss Sinc Ceramic Bearings
$77.70
DT Swiss Sinc Ceramic cartridge bearings. - The black dust cover is intended to be installed facing the hub and the tan seal is intended to face externally
Sturmey-Archer Drum Brake Front Hub
$77.90
- A356 aluminum hub shell with 9mm solid nutted axle (136mm overall axle length) - Choose 70mm or 90mm drum brake front hub (brake lever sold separately)
SRAM 900 Front Hub
$90.00
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM's 900 hubs are ready for the challenge. On the inside, their smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Fully convertible with tool-free end caps - 24, 28 or 32 spoke holes
DT Swiss Track Front Hub
$100.90
Track Front Hub - High polish silver aluminum
DT Swiss 370 Track Rear Hub
$128.90
Track Rear Hub - .
Shimano Alfine Centerlock Dynamo Hub
$143.99
Shimano Alfine Center Lock Dynamo Front Hub - Compatible with 26 to 28-inch wheel sizes - Light alloy QR lever and nut - 6V, 3.0W output - Centerlock rotor mount - Spoke Interface: J-Bend - Weight: 575g
We The People Helix Freecoaster Hub
$166.99
Featuring WTP's very own, patented 3-point clutch friction system, the Helix hub will take you backwards in style and hold up to any peg abuse that comes its way. - Unique internal arrangement with face-bearing clutch stopper - WTP Patented "Tri-Point" friction system - Hub Drilling: 32 - Cassette Body Type: Single Cog Driver - Axle Size: 14mm - Spoke Interface: J-Bend
Shimano Metrea Dynamo 3.0W Center Lock Disc Front Hub
$174.99
The DH-UR700-3D Dynamo hub employs a new internal unit construction that is lighter and also reduces dynamo drag while producing 3 watts. It is designed for 26 to 28-inch quick-release wheels. - New internal unit construction is 28g lighter than DH-T8000-3D - More efficient wheel rotation reduces dynamo drag by up to 44% from DH-T8000 - Angular contact bearings - Compact & lightweight - Low rotational resistance - Durable sealing performance
Odyssey Clutch V2 Freecoaster Hub
$189.99
The Clutch Hub is a traditional clutch-based coaster hub design that eliminates all of the problematic elements on ordinary hubs and only keeps the parts that work. A new, super-strong FULL 14mm axle, bearing configuration, and drag mechanism design stops the need for constant repairs. Equipped with external slack adjustment, which can be done with a 2.5mm hex key through a hub shell access hole (can be adjusted without removing the wheel), and an improved plastic hub guard spec. Same Clutch coaster hub you’ve come to love, but with a few upgrades. Features: - Maximum strength axle design - Super-durable bearing arrangement throughout - 2.5mm hex key slack adjustment through hub shell access hole. No wheel removal required. - Super-durable drag mechanism design - Crankflip ready Improvements Over the Clutch V1: - 14mm chromoly axle bolts on both the drive and non-drive side for greater reliability - Improved clutch engagement - Improved manufacturing precision throughout - More slack than the V1 hub - All-new durable proprietary plastic spec for the removable hub guard Specs: - 36-hole, 2014-T6 aluminum shell - 9T Driver - Left or right hand drive - 22 oz / 623g Guard Options: - Plastic hub guard included (but optional to use) - Alloy hub guard also available
Shimano Alfine Dynamo 3.0W Center Lock Disc E-THRU Front Hub
$189.99
The Shimano Alfine DH-UR705-3D Dynamo hub employs a new internal unit construction that is lighter and also reduces dynamo drag while producing 3 watts. It is designed for 26 to 28-inch Center Lock wheels and uses a 12 x 100mm E-THRU axle design. - New internal unit construction is 28g lighter than DH-T8000-3D - More efficient wheel rotation reduces dynamo drag by up to 44% from DH-T8000 - Proper positioning with 12mm E-THRU - Angular contact bearings - Compact & lightweight - Low rotational resistance - Effortless setting of disc rotor - Durable sealing performance
Page 1 of 2 Next page