Lighting

Crank out those night laps and charge hard on technical trails with NiteRider's Pro 1400 Race on your helmet or handlebars. The power-to-weight ratio is astounding with a ton of light—1400 lumens—that illuminates everything on the trail. At barely over a pound, the lightweight 1400 runs from 1.75 to 24 hours and is powered by a Lithium-ion battery which recharges in a quick five hours. Five steady light modes (High, Medium, Low, Race, and Walk) and three flashing modes (Flash, SOS, and Beacon) are all controlled by a switch on the light. Plus, the eight-step fuel gauge keeps you on top of battery life.

Flexible Versatite™ mount for Dash, Zot, Dart, Hotrod, Hotshot Micro 2W, Hotshot Pro 200 (flexible mount version; not for Hotshot Pro 200C) systems. Compatible with most handlebars, seat posts, and seat stays including aero styles.

Product details: - Replacement or extra mounts for all Bontrager Flare rear lights - Use to mount Flare lights to seatposts, racks, seatstays, or any other creative spot - Kit includes Flare light mount, two bases, and rubber strap adapters

The NiteRider Tail Light Mount – Seatstay and Seatpost is our classic seatpost mount design that gives riders the option to mount their tail light to their seat stay, using the included seat stay clamp. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

Product details - Perfect for mounting compatible Flare taillights to rear rack - Includes a bolt and star washer for extra security - Easiest to install with light installed for better leverage

Increase your visibility by using the Stix Arm/Leg Band mount to attach your Specialized Stix light to arms and legs. - Includes rigid mount and fabric band for comfortable and secure hold. - Wraps around ankle to keep pant legs away from chainrings. - Increases visibility and versatility of Stix lights, both on an off the bike.

Mounting bracket for MSW front White Bat Headlight. - Includes 1 front mounting bracket

Replacement bracket for Pico and Tigermoth lights. - Includes 1 front bracket, 1 rear bracket, and 2 mounting straps

Put a Flare almost anywhere - For use with all Flare tail lights - Perfect for attaching to a seat pack, belt, backpack, or anything with a loop - 2g

Mounts a Specialized Stix light to a CPSC, DIN standard reflector/rack bracket or the Specialized Pizza Rack. - Vertical CPSC hole pattern. - This mount can attach to the Horizontal Din hole pattern. - Specialized single hole pattern for the Pizza Rack. - Mounts Stix light horizontally. - Includes all mounting hardware.

USB cable for charging NiteRider® bike lights that utilize a micro USB charge port connection System Compatibility - All Lumina Series - Swift Series - MiNewt Cordless Series - MiNewt Mini Series - Lightning Bug 120 - Sentinel - Solas - Omega - Sabre - Sentry Aero - Stinger

- Quick Charge USB-to-Micro-USB cable to charge your rechargeable Bontrager lights - Also able to charge most other Micro USB systems - 9 inches/23cm long

Replacement LED assembly for the Centro LED helmet.

The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL Not compatible with omega 300 and sentry aero 260 tail lights.

Mount your Cygolite bicycle headlight to a variety of GoPro compatible interfaces and third-party mounting options that are compatible with the GoPro interface. - Compatible with Ranger, Expilion, Metro, and Streak series - Includes adapter piece only

The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts. System Compatibility - Sentinel - Solas - Sabre - CherryBomb

All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm. SYSTEM COMPATIBILITY - Lumina Series - MiNewt Cordless Series - Mako Series WARRANTY - This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)

All NiteRider headlight mounts deliver rock solid mounting, but for those who demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. System Compatibility: - Lumina Series - MiNewt Cordless Series - Mako Series

The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended. System Compatibility: - Lumina Series - Mako Series - MiNewt Cordless Series

If you're looking to mount your NiteRider PRO series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment. SYSTEM COMPATIBILITY - PRO Series Not compatible with Lumina Pro lighting systems

If you're looking to mount your Lumina and Mako series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment. System Compatibility - Lumina Series - Mako Series

CatEye's Center Fork Bracket helps clear your handlebars by positioning your favorite CatEye headlight (sold separately) in front of your bike's head tube.

- Installs under the seat for a low profile, less cluttered appearance - Easy to install and stays secure in all terrain - Clamps to most two-rail bicycle saddles - Use with Cygolite Hypershot and Hotshot tail lights - Can also be used with GoPro compatible interface - Premium plastic for strong durability - Only weighs 23 grams - Less prone to scratching bikes compared to metal mounts - Tail light secures to mount without removing from saddle rails - Designed, engineered, and assembled in the USA

Easily integrated Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras. - Quickly mount rear light to the back of your Bontrager Circuit MIPS road bike helmet - Tested with an accelerometer for intended breakaway point if involved in a crash

Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr High Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light above your stem to see and be seen. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Ion headlights - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

This helmet mount works with all CatEye Lights. Pair it with the Volt 800 for the ultimate trail solution.

Product details - Easily integrate your Bontrager Flare tail light on your Madone 9 Series - Quick release designs matches perfectly on the Madone 9 proprietary seatpost clamp

Want to run your Flux headlight on the latest trail bikes? You're going to need this mount for your 35mm cockpit. - Quick-release extruded aluminum handlebar clamp. - Clamp fits 35.0mm handelbars.

Helmet mount kit compatible with Ranger, Expilion, Metro Pro and Plus, Metro, Streak, and Pace systems. - Includes: helmet bracket, velcro strap, and foam pad.