Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Chains

$9.00
SRAM's PC 830 Chain offers accurate shifting, excellent durability, and superior power transfer for 8-speed drivetrains.
$9.99
Chain FEATURE - Anti-corrosion treatment for longer service life BENEFIT - Anti-Corrosion
$13.00
SRAM's PC-1 Single Speed Nickel Chain is designed for singlespeed bicycles so it won't jump off when you're laying down the power. It comes with a connector link for easy installation and removal.
$14.95 - $16.95
The KMC S1 is a single-speed chain suitable for use with internally geared hubs, or any single speed drivetrain. - High pin power with reinforced durability - Offers a quieter riding experience - Anti-drop design - Inner plate chamfering helps to provide fast and smooth shifting - Internal gear hub system compatible - Links (links): 112 - Color: Silver - Width: 9.3mm - Drivetrain Speeds: Single Speed 1/2 x 1/8-inch - Half Link Chain: No
$14.95
SRAM's PC-850 Chain makes a trusty partner over hill and dale. It's easy to install, too, thanks to the no-tools-needed PowerLink. Quiet, smooth, reliable and very affordable, the PC-850 is a fine value.
$16.00
Designed from a long line of dependable, lightweight chains that are built for toughness, the recommended chain for APEX 1, PC-1110. Designed with SRAM’s trusted XX1 geometry, the PC-1110 features solid pin construction, 11-speed PowerLock and smooth, efficient shifting that you can count on every time out. - Optimized to work with X-SYNC rings for precise and dependable 11-speed performance - Fully compatible with all SRAM 1x drivetrains - Closing Link: PowerLock - Outer Plate: Polished grey - Inner Plate: Polished grey - Pin Treatment: Chrome Hardened - Weight: 232 - 273 grams - Rivet Type: Solid Pin - Speeds: 11
$16.95
The PC-951 is SRAM's most economical PowerChain and maintains their high standards of quality. It boasts tough chrome-hardened pins for durability and accurate shifting. And, with its great PowerLink, you don’t even need tools to install it.
$16.99 - $19.99
Odyssey Bluebird chain is the proven and reliable KMC 510-HX chain with an added a permanently attached, factory installed half-link to one end. When the chain is trimmed to size you can easily decide whether or not to use the half-link. Original factory assembled pin joints are radically stronger than workshop assembled ones, so this is a huge benefit. - Proven and reliable KMC 510-HX chain - Factory installed half-link for a radically stronger set-up
$19.00
SRAM's PC-870 Chain makes a trusty partner over hill and dale. It's easy to install, too, thanks to the no-tools-needed PowerLink. Quiet, smooth and reliable, the PC-870 will take you where you want to go.
$22.00
SRAM’s 10-speed chain is compatible with all industry-standard 10-speed systems. And, with its great PowerLock connecting link, installation and removal is a snap.
$23.00 - $31.00
FSA’s quiet, efficient, and durable chain. Team Issue chains are nickel plated and chamfered to enhance shifting performance. - Tool-free connector link included - 6.4mm width - Weight: 275g
$23.00
SRAM’s PC-971 Chain delivers light weight, strength and smoothness to your drivetrain. Its nickel-plated sideplates provide faster and more accurate shifting plus excellent reliability. And, with its great PowerLink, you don’t even need tools to install it.
$23.95
SRAM’s 10-speed chain is compatible with all industry-standard 10-speed systems. And, with its great PowerLock connecting link, installation is a snap.
$24.00
SRAM’s 11-speed chain features heavily chamfered outer plates for improved shifting and quiet running. And, with its great PowerLock connecting link, installation and removal is a snap.
$24.00
- For SRAM Rival22 11-speed road drivetrain Specs: - Links: 120 - Chain Weight: 259g - Speed: 11 - Link Type: Powerlock
$24.99
Shimano CN-HG71 6/7/8-Speed Chains - 8-speed MTB chain meets durability requirements for e-bike use - Designed for precise Hyperdrive SIS and Dual SIS Index shifting - Includes chain and chain connection pin, or quick link - Links: 116
$25.00
Designed for use with T-Type chains, the Eagle Transmission PowerLock provides the same rugged dependability as its predecessors. - For use with T-Type chains - No tools required for installation
$25.99
WTP Supply Chain, heat-treated links and riveted pins, made by KMC, thicker plates to resist impacts and grind damage. - Includes pre-assembled half link - Stamped WTP logo - 90 links - Color: Silver - Drivetrain Speeds: Single Speed - Chain Connection Type: Pressed Pin
$26.95
Shimano's Deore-level 10-speed Chain offers excellent power transfer and top-notch durability. It showcases a mud-shedding design and Shimano's directional design with engineered inner and outer plates for smooth, fast and precise shifting.
$26.99
The Cult half link chain features teflon coating engraved with cult logos and is designed to help dial in the rear end length on frames with short dropouts. - Rounded side plates are compatible with 8T and larger drivers - Color: Black - Width: 1/2 x 1/8 mm - Drivetrain Speeds: Single Speed - Chain Connection Type: Pressed Pin - Half Link Chain: Yes
$26.99
Half-links allow for a more precise fit on the wide variety of gearing and chainstay length combinations out there. The Odyssey Bluebird Half-Link chain is built with proven chromoly link plates and hardened pins for greater durability. - Chromoly link plates - Hardened pins for greater durability - 1/2” x 1/8” size
$26.99
WTP Demand Chain is a super tough and very durable street chain with taller and thicker plates to resist impacts and grind damage. - Includes half link - Stamped WTP logo - Heat-treated links and riveted pins - Made by KMC - Links (links): 90 - Color: Black - Drivetrain Speeds: Single Speed
$27.95
The KMC HL1L Wide chain is suitable for a variety of single-speed riding styles, such as BMX or fixed gear. - Compatible with Shimano, SRAM, and Campagnolo drivetrains - Stretch-proof treatments provides exceptional durability - Hollow pin construction reduces chain weight - Links (links): 100 - Color: Black - Width: 9.5 mm - Drivetrain Speeds: Single Speed - Chain Connection Type: Bullet Pin - Half Link Chain: Yes
$28.00
The basis of every Eagle drivetrain is its chain—and the NX Eagle chain is designed and manufactured using genuine SRAM Eagle architecture, so it is fully compatible with every other component in the Eagle ecosystem. The NX Eagle chain features solid pin construction, Eagle PowerLock, and smooth, efficient shifting that you can count on every time out. Features/Specs - Eagle PowerLock chain connector with FLOW LINK technology provides better chain-guiding and increased longevity - Unique features and design also provide significantly improved wear resistance on Eagle cassettes and rings - Weight: 278g (126 links) - Material: steel - Speeds: 12 - Compatibility: All levels of Eagle drivetrain systems
$29.95
- Deore/Tiagra 9-speed compatible - 3/32-inch - 116 links
$29.95
Shimano Tiagra CN-4601 10-Speed Chains - For Ultegra 6703 and 105 5703 triple drivetrains, please see 10-Speed Hyperglide non-directional chains - Hyperglide 10-Speed chain - Not compatible with Shimano 10-Speed Dyna-sys mountain bike drivetrains - Directional inner and outer plates designed for better contact with gear teeth allow smooth shifting even under high load conditions - Chromized rivet pins improve wear resistance - Perforated plates for reduced weight - 116 links
$32.95
The M7100 chain provides enhanced chain retention thanks to an extended portion of the inner plate. The new chain features quick-link assembly and SIL-TEC treatment for extended offroad durability. - Extended inner plate improves chain engagement and retention - Reduced shift times and pedaling shock - Non-reusable - Features Shimano's SIL-TEC ultra-low friction surface treatment - Includes Shimano Quick-Link (SM-CN910-12) - This chain meets durability requirements for E-MTB applications
$32.95
- Smooth and reliable shifting performance with asymmetric plate design for 11-speed - SIL-TEC surface treatment
$36.00
The chain is the heart of the Eagle 1x12 drivetrain, ensuring quiet operation, long life and precise shifting. It features the same link geometry as XX1 Eagle, with solid pins and a more modest finish treatment. - Not for use with front derailleur drivetrains - Links (links): 126 - Drivetrain Speeds: 12 - Chain Connection Type: Single Use Master Link - Half Link Chain: No - Weight: 260 - Compatibility: All levels of Eagle drivetrain systems
$38.95
CN-E6070-9 Chain (9-speed) FEATURE - New chain plate dimension BENEFIT - Reinforced against chain cut for E-BIKE use - More efficient and silent, less maintenance by SHIMANO “SIL-TEC”(CN-E6090-10) - Front single gear only
Page 1 of 3 Next page