Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Tools & Tuning

$137.95
Protects the wax base during transport and is easy to prepare for the next training session. - Easy to apply with a waxing iron. - Easy to scrape and brush. - Fluoro-free
$137.95
Protects the wax base during transport and is easy to prepare for the next training session. - Wide range of applications, 0°C to -10°C. - Easy to apply with a waxing iron. - Easy to scrape and brush. - Fluoro-free
$137.95
BP099 is a soft wax with a low melting point. Recommended as the first layer on new skis. BP99 is also recommended for skis or snowboards in the “Hot Box”. The temperature in the Hot Box must never be higher than 55°C. Temperatures higher than 55°C may cause delamination of the base. - Soft wax with a low melting point - Recommended as the first layer on new skis. - Base prep wax.
$24.95
Great glide made easy! Great liquid glider, very durable. - A great wax for typical winter conditions - No iron needed Temperature range: -2°C to -7°C (28°F to 19°F). A liquid spray-on training wax that can be used alone or as an underlayer for racing waxes. CH07XL performs at its best when typical winter conditions below the freezing point. Can handle various snow conditions and is not humidity sensitive. A safe choice that rarely underperforms within its core area of use. *Extremely flammable aerosol. Pressurized container: May burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness.
$12.95
Fluor Free Hydrocarbon wax 0°C to +10°C. Soft wax for wet snow. Good for first base prep of new skis. - A versatile wax for warm conditions - Ideal for base prep and training use Temperature range from 0°C to 10°C (32°F to 50°F). Recommended iron temp.: 120°C (248°F). CH10X is made slightly harder than the old CH10. Test results show that a harder wax performs better in very wet saturated snow. The adjusted hardness makes CH10X more durable than before. A good wax for base prep and training. For racing, we recommend to go with fluoro wax in this temperature area. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax.
$32.95
Swix Cleaners - Lightly scented - Dearomatized hydrocarbons - Citrus based formula - Increased product shelf life
$19.95
F4 universal liquid glide wax for skis and snowboards. A wax with a wide range of uses. - Universal wax for all temperature ranges - Glide wax for ski mountaineering and summer skiing - Preservative wax for metal edges - Easy application
$24.95
F4-100NW has a sponge foam applicator on one side of the bottle for applying wax, and a felt pad on the other side for polishing. A handy bottle to carry in your pocket. Apply a thin layer over the base surface. Let it dry for approx. 2 minutes. Finish by polishing with the felt pad. Apply F4 to the steel edges when storing your skis or board after the season. This prevents the edges rusting.
$37.95 - $48.95
Gives faster skis. Cleaner & conditioner glide sections of racing skis and snowboards. - Ski Cleaner for glide zone. - For everyone who waxes their skis. Cleaner for fluoro glide wax and CH-wax. Improves glide and conditions the base. For glide sections only on all racing skis and snowboards. Involves no hard mechanical treatment of the base. No wearing of the stone grind pattern in the ski base. Makes the ski faster! Apply cleaner (I84C) with Fiberlene. Brush with white nylon brush while wet. Wipe clean with Fiberlene. Let dry for 5-30 minutes. Brush with hand steel brush (or Roto steel brush). Wax with Base Prep wax. 16.9 fl. oz.
$47.95 - $119.95
HS10 is a great base prep wax, but also a great training wax. Ideal in warm conditions, typically during spring skiing. For racing, we recommend going with a top coat as the final layer. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 150°C (302°F). Details: - A popular wax in nordic disciplines - Good water repellent properties - Replaces LF10X - For training and competition Highlights: - For warm conditions - Easy to work with - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Well tested on many conditions
$47.95 - $119.95
The 5 series is the hardest wax in the HS line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It’s a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. For fresh, old, or manmade snow. - HS5 can be used as a race wax alone or as a base for top coats. - Recommended iron temp: 150°C (311°F). - -10°C to -18°C (14°F to 0°F).
$47.95 - $119.95
HS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. HS6 has good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS6 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 155°C (311°F). Highlights: - Fantastic allround glider - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Exists also in liquid - Well tested on many conditions
$39.95
Liquid glide wax for racing and fast training sessions. HS7L is recommended from -2 to -8 degrees. - A very good glide wax for traditional winter conditions - No need for a waxing iron - Replaces CH7XL.
$47.95 - $119.95
HS7 performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. Can be used as a racing wax at low air humidity, but will also serve the purpose as a brilliant training wax. The speed of the iron should be approx. 8-10 sec. on a skating ski or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS7 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (302°F). Highlights: - Fantastic allround-glider - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Well tested on many conditions
$29.95
HS liquid glide waxes are so easy to use that anyone can achieve a good result without having a dedicated waxing booth or lots of extra equipment. Glide wax spray is a popular choice for leisure skiers. High Speed (HS) is specially developed for younger racers and the ambitious leisure skier. All waxes in this series have high performance and good durability. This makes them an affordable option for both competition and training. About HS8L: A liquid training and racing wax that can be used alone or as a base for other glide products. The HS8L is extremely versatile on both sides of zero with very good feedback from racing service. It works just as well on old snow at minus temperatures as falling fresh snow and plus degrees. Quite simply a “must have” product for conditions you will encounter frequently. How to apply HS8L: Spray on the ski, wait 15 minutes and brush off with a T21 natural cork with felt. - Amazing glide wax that is easy to apply - For training and racing - Improves ski glide - Fluoro-free and 100% biodegradable - Also available as hot wax - Thoroughly tested in different conditions
$47.95 - $119.95
A great wax for both base-prep and training. It can also be used as a race wax, preferably used with a top coat. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 150°C (302°F). Replaces the LF8X. Highlights: - Easy to work with - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Well tested on many conditions
$21.95
Green base klister that is used as the first layer of klister. Temperature range -15°C to +10°C. NB: Apply thinly. Then apply regular klister for the relevant conditions as the next layer. Spray nozzle that makes it easy to apply a very even and thin layer of klister. To apply the base klister, hold the can upside down and move it slowly along the base, on each side of the central groove, while spraying. Hold the can approx. 4-5 cm. above the base. Great for both racing and recreational skiing. - Green base klister - Easy to apply. - Hold the can upside down and move it slowly along the base to apply the klister. - Great for both racing and recreational skiing. - An alternative to KX20. - No iron needed.
$23.95
Superior durability! Baseklister in the KX series, for all conditions. For enthusiasts and racers, great durability. Base klister for cold and warm conditions. To be used as the first layer for better adhesion of other klisters to the base. High wear resistance on ice and hard coarse snow. Always apply indoors with a waxing iron appr. 110°C (230°F). Only cover the sanded grip zone. Heat the tube slightly for easier application. By “edging” the waxing iron you get a controlled equal distribution of the klister. Scraper included.
$23.95
Great kick in icy conditions! The KX klisters are durable klisters custom-made for different conditions. Temperature range 0°C to -12°C (32°F to 10°F). For coarse snow/hard tracks and icy conditions. Excellent on hard-packed coarse cold snow, but can also be an alternative to KX20 as base klister. It is easier to apply than KX20. In racing KX30 is often used as the "in-between" klister on top of KX20, but rarely used as the last layer due to the preparation of the tracks. For general skiing on cold mornings after it has been wet the day before, it is a highly useful product. Scraper included.
$23.95
Fantastic mid-layer klister! The KX klisters are durable klisters custom-made for different conditions. Temperature range +1°C to -4°C (32°F to 25°F). Excellent klister on transformed cold coarse corn snow starting to get wet. Midlayer klister applied on Base klister (KX20 or KB20) to avoid that the top layer klister slides back into the glide zone. Scraper included.
$23.95
Versatile towards dry snow! The KX klisters are durable klisters custom-made for different conditions. Temperature range +2°C to -4°C (36°F to 25°F). Developed for transformed and fine-grained snow. Very good when warmer than 0°C and relatively fine-grained snow. The klister that goes the farthest into dry snow without icing! Scraper included.
$23.95
Great grip in moist snow! The KX klisters are durable klisters custom-made for different conditions. Temperature range +1°C to +5°C (34°F to 41°F). For wet and moist coarse corn snow. Scraper included.
$19.95
Fluor Free Efficient cleaner for integrated skins. - Cleaner for integrated skins - To be used after skiing - For skin ski owners SWIX Skin Cleaner in a large container. Cleans integrated skins in a gentle way without affecting the skin glue. Restores the properties of the skin and increases its efficiency. To be used after skiing. Pumpspray. Does not include Fiberlene.
$26.95
Zero spray for the grip zone on classic skis with mechanical grip or skis that you yourself have rubbed. Prevents icing on new and wet snow around 0°C. Bottle with "upside-down" spray nozzle for easy application. Allow the spray to dry for a few minutes after application. - Impregnation for zero skis - Too conditions around freezing - For those who want a better skiing experience - Reduces the risk of icing and improves glide
$29.95
Waxing pack for cross-country skis. - Convenient pack - For normal dry wax conditions - For those who want a better skiing experience - Everything you need to achieve good grip
$15.95
A wax for extreme cold conditions, which can perfectly be used alone as a race wax when the air humidity is low. It performs very well on artificial snow and has great durability. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min.) for better durability. Scraping after approx. one minute. It’s important to have a good iron to get an efficient melting of the wax. Scraping after approx. one minute. In the warmer part of the temperature range, and when high air humidity, a powder or other top coat product will increase the performance. - Recommended iron temp: 155°C (311°F). - Replaces the CHX4. - -14°C/-32°C (7°F to -26°F).
$15.95 - $139.95
PS10 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 120°C (248°F). - A versatile wax for warm conditions - Low melting point and easy to apply
$15.95 - $139.95
The PS5 is the hardest wax in the line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It's a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. For fresh, old, or manmade snow. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. PS5 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (311°F) - Recommended iron temp: 150°C (311°F). - Replaces the CH5X. - -10°C to -18°C (14°F to 0°F).
$15.95 - $139.95
PS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. PS6 has good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. PS6 can be used as a race wax alone or as a base for powders and other top coats. Recommended iron temp: 145°C (293°F). - Recommended iron temp: 145°C (293°F). - Replaces the CH6X - -6°C to -12°C (21°F to 10°F).
$15.95 - $139.95
PS7 is a wax that performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end result. PS7 is an economic training and racing wax as well as an all-round base prep wax. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 140°C (284°F). - Recommended iron temp: 140°C (284°F). - Replaces the CH7X. - -2°C to -8°C (28°F to 18°F).
Page 1 of 4 Next page